Bisley X Taped two tone hi-vis freezer jacket

Bisley builds this jacket for genuinely cold environments, and it sits in the Hi-Vis Workwear range under Freezer Wear. That placement tells you the brief straight away: cold stores, chillers and outdoor work in the depths of winter, not a general knock-around layer for a mild morning.

The number that matters here is the insulation. Bisley quotes 687gsm of multi layer insulating power, and a chunk of that comes from 360gsm of Sorona Aura insulation, which the brand uses for extra warmth in extreme cold. The outer is a 100% polyester ripstop with a PU coating at 220gsm, the lining is a 100% polyester pongee at 107gsm, and every seam is seam sealed with a waterproof rating quoted up to 10,000mm H2O. So it is trying to keep both the cold and the wet out at the same time.

If you are kitting out a team that spends real time below freezing or working outdoors through a wet, cold shift, this is a sensible shortlist candidate. You can view the Bisley X Taped Freezer Jacket on Done Right Safety to check the colour and size range before you commit a group order.

Matching the jacket to the cold

The 687gsm multi layer build with 360gsm of Sorona Aura at its core is a serious amount of loft, aimed at freezer and extreme cold work. If your crew is mostly in mild conditions that warmth becomes a liability and you would be better served by something lighter. The fit of the freezer jacket should also leave room for a mid layer underneath, so when you order a sample, try it over the base layers people will actually wear.

Checking the weatherproofing and visibility

The waterproof rating is quoted up to 10,000mm H2O and every seam is seam sealed, so on paper it is set up to handle wet, cold conditions rather than just dry chill. When samples arrive, check that the seam sealing is intact and that zips and closures pull cleanly with gloves on, since that is how the jacket will be worn in the cold. For visibility, the reflective taped H pattern with the X back and the extra hem tape is the working part, so confirm the tape sits flat and the two tone colour suits your site's hi-vis policy.

Care and getting the most out of it

Insulated jackets live or die on how their loft is treated, so follow the care instructions on the garment label rather than washing it like a standard shirt. The Sorona Aura wadding is what delivers the warmth, and harsh washing or high heat can flatten that over time. Keep the seam sealing and the PU coated ripstop shell clean and dry between shifts, and inspect the reflective tape and seams regularly so the jacket keeps doing both jobs, warmth and visibility, through a cold season.

These are all genuine same-type hi-vis work jackets from the same Hi-Vis Workwear range, so it is a fair like-for-like comparison. The real differences come down to how much insulation each one carries, how waterproof it is, and whether it is a dedicated freezer jacket or a more versatile wet weather option.

The closest head to head is the Bisley against the Workcraft Hi Vis Freezer Jacket. Both are dedicated freezer jackets, but the Bisley carries a much higher 687gsm of multi layer insulation with Sorona Aura and a quoted 10,000mm waterproof rating, while the Workcraft runs a lighter 320gsm fibrefill with a water resistant shell. The Workcraft does list AS/NZS 4602.1:2011, which the Bisley pack does not, so if a stated hi-vis standard is a procurement requirement that point matters and you should confirm the Bisley's standards on its product page.

The Hard Yakka 4 in 1 and the Syzmik Storm Jacket are here because they are the same type of jacket but solve a slightly different problem. The Hard Yakka trades some outright warmth for versatility with its reversible inner vest, so it suits crews moving between conditions across a day. The Syzmik is a 5,000mm waterproof storm jacket that is quilt lined rather than freezer rated, so it is the pick for wet, cold weather rather than deep freeze. If your work is genuinely below zero for long stretches, the Bisley's heavier insulation is the reason to choose it over those two.

Insulation is the thing that actually counts in freezer and extreme cold work, and the Bisley X Taped Freezer Jacket leads there. The 687gsm multi layer build with 360gsm of Sorona Aura is a lot of warmth, and pairing it with a 10,000mm waterproof rating and fully seam sealed construction means it is set up for cold that is also wet. The reflective taped H pattern with the X back and extra hem tape covers the visibility side.

What is confirmed on the listing is the insulation weights, the Sorona Aura wadding and its partially plant based, sustainably sourced credentials, the polyester ripstop shell and pongee lining, the waterproof rating, the seam sealing, the ribbed cuff and the reflective tape layout. What the pack does not list is any hi-vis or visibility standard, so do not assume one. The available colours, the two tone configuration and the size range are also not spelled out here.

Treat this as a strong choice when deep cold is the main challenge, and confirm the standards, colours and sizes on the Done Right Safety product page or datasheet before placing a group order, especially if a stated hi-vis standard is part of your site policy.