Bisley hi-vis long sleeve polo

Bisley builds this long sleeve hi vis work polo around a cool mesh fabric that is light to wear and lets air move through it. The whole point of a mesh polo like this one is to keep you visible on site without cooking you, which matters when the job runs all day in the heat and you still want full arm coverage.

The body uses a spliced front with a full hi vis back, and the shell is 100% polyester mesh at 140gsm. The collar and cuffs are a contrast colour with double hi vis tipping, and there is a contrast underarm gusset that gives the arms a bit more room to move. It comes in a Modern Fit, which sits closer to the body than a boxy traditional cut.

On the compliance side, Bisley lists this polo against Australian and international standards as a Class D day-only hi vis garment, so it is made to be seen during daylight rather than in low light. If you want the full picture before you order, you can check the current listing for the Bisley Hi Vis Long Sleeve Polo on Done Right Safety.

Picking the right option for the job

Start with the light source on your site. This polo is listed as Class D, which means day only. If any part of your work runs at dusk, dawn or night, you need a day/night garment with reflective tape instead, because this one is built to be seen in daylight. For purely daytime work, the mesh build is the draw: it is a lighter 140gsm polyester, so it suits warmer conditions better than a heavier cotton top while still giving you long sleeves for coverage.

Fit is the next call. This comes in Modern Fit, which sits trimmer than an older boxy cut, so if your crew prefers a roomier feel you may want to size accordingly. The range runs XS to 6XL, which covers most of a mixed team off the one style.

Checking fit and sizing

Long sleeve polos should let you reach overhead without the cuff dragging up your forearm or the body riding out of your waistband. The contrast underarm gusset on this one is there to help with that range of movement, so check the shoulders and arms feel free when you try a size. If you are between sizes in a Modern Fit, the next size up usually gives a more relaxed feel on the body.

Care and replacement

Hi vis only does its job while the fluoro fabric stays bright, so retire any polo once the colour has faded to the point it no longer looks vivid in daylight. Follow the care instructions on the garment label to keep the fabric and tipping in good order, and replace the polo if you see splitting at the seams, holes, or general wear that would knock down its visibility on site.

The three polos compared here are like-for-like alternatives rather than adjacent swaps: every one of them is a hi vis work polo, and the table below sets out where they differ.

The real split here is fabric. This Bisley and the BK6425 both use cool mesh, so they lean lighter and more breathable for hot daytime work, while the JB's is a 100% cotton polo at a heavier 180gsm that some workers prefer for the natural-fibre feel and the reinforced pocket with a pen insert. If you want a pocket and the cotton hand, the JB's makes the case.

Between the two Bisley mesh polos, the difference is the visibility detail. This BK6219 carries the published hi vis and UPF standards in the listing and uses double hi vis tipping on the collar and cuff, while the BK6425 adds reflective piping on the side and shoulder panels but does not list its standards in the pack, so confirm those on its product page if compliance is the deciding factor.

For a daytime hi vis polo with full arm coverage, this Bisley does the obvious things well. The cool mesh at 140gsm is the headline: it is a lighter polyester build aimed at keeping you cool while still covering the arms, and the contrast underarm gusset is a sensible touch for reach. The XS to 6XL range also makes it easy to kit out a whole crew from one style.

What is clearly confirmed on the listing: 100% polyester mesh at 140gsm, Modern Fit, the long sleeve cut with contrast ribbed collar and cuffs, and the three standards Bisley names against it (AS/NZS 1906.4:2010, AS/NZS 4602.1:2011 Class D day only, and AS/NZS 4399:2017 for UPF).

What to verify before you commit: the exact UPF rating number, the available colours, and the precise body and sleeve measurements for the Modern Fit in your size. Those details sit on the product page or datasheet rather than in this summary, so check them there if they will decide the purchase.