Pratt Standard spill pallet, 4 drum

The Pratt Spill Pallet Standard 4 Drum is a four-drum spill containment platform. You stand your drums on it, and if one of them leaks or weeps, the liquid drops into a sump underneath instead of running across the floor. That is the whole job, and it does it without any moving parts to fail.

It is moulded from polyethylene, so it stands up to a broad range of chemicals, including acids and corrosives. The sidewalls are a bright safety yellow and translucent, which means you can glance at the unit and see whether liquid is pooling in the sump rather than pulling drums off to check. The sump holds 249 litres, and the platform is rated to carry a serious load: up to 1364 kg of stored product, with a uniformly distributed load figure of 2727 kg.

If you are storing drums of oil, fuel, solvent or chemical and need a tidy, code-aware way to keep drips off the slab, this is a sensible base unit. You can view the full listing on Done Right Safety to confirm the current details before you order.

Picking the right size

Start with how many drums you actually keep on the floor at once. This unit takes four, so it suits a grouped storage point rather than a single drum in a corner. Check the load too: it is rated up to 1364 kg of stored product, which comfortably covers four full 205 litre steel drums, but it is worth doing the sum for whatever you store. The sump holds 249 litres, so it gives you working containment volume beneath the four positions. The footprint is 1295 mm square and only 254 mm tall, so plan your floor space and any aisle clearance around that.

Setting it up and loading drums

Site the pallet on a flat, level surface so the sump drains and sits evenly. Lift drums onto the grated deck rather than dragging them, and keep them spaced over the four positions so the load stays balanced within the UDL figure of 2727 kg. Because the polyethylene handles acids and corrosives, you can mix chemical drums on it, but always store products that are safe to keep together and keep incompatible chemicals on separate units.

Inspection and upkeep

The translucent yellow sidewalls are the easy win here: a quick visual check tells you whether liquid is sitting in the sump. Build that look into your routine, and empty and clean the sump whenever it catches a spill so the full 249 litres stays available. Hose or wipe the deck down to clear grit and residue, and check the moulding for cracks or distortion if a drum has been dropped on it. Done Right Safety lists this unit as meeting EPA Container Storage Regulation 40 CFR 264.175 and UFC Spill Containment Regulations, so if you need it to satisfy a specific Australian requirement, confirm that against your site rules and the product page or datasheet before relying on it.

All four units in the table are like-for-like spill containment platforms from Pratt, so it is a fair same-type comparison: the main differences are how many drums each one holds, how much it can carry, and how tall the unit sits.

The choice mostly comes down to how much you store. If you keep four drums together, the 4 Drum unit is the obvious pick, and it shares the same 249 litre sump as the 2 Drum (1011) while carrying double the UDL. Step down to the 2 Drum pallet when you only have a pair of drums but still want that full sump volume.

The Spill Deck 2 Drum (1086) trades sump volume (83 L) for a low 146 mm height, which helps when you need to roll drums on by trolley or get a forklift under awkward access. The Utility Spill Tray (1034) is a different scale altogether: it is for catching drips under cans and pails, not for drum storage, and it nests for easy storage when it is not in use.

For a four-drum storage point, this is a straightforward, well-specified unit. The numbers Done Right Safety lists stack up sensibly: a 249 litre sump under four positions, up to 1364 kg of stored product, a 2727 kg UDL, and a 1295 mm square footprint at 254 mm tall. The polyethylene moulding is the right material for mixed chemical drums, and the translucent yellow sidewalls are a genuinely useful touch for day-to-day leak checks.

What is confirmed on the listing is the construction, the dimensions, the capacities, and that the unit is described as meeting EPA Container Storage Regulation 40 CFR 264.175 and UFC Spill Containment Regulations. Those are the references provided, and no separate Australian standard is listed for this product.

So before you buy, verify two things on the product page or datasheet: that the listed regulations and any ratings match what your site or auditor requires, and that the load and sump figures suit the exact drums you intend to store. If both check out, it is a solid base for a compliant drum storage area.