Pratt economy 75L oil and fuel spill kit, white bag

Pratt supplies this economy oil and fuel spill kit at 75 litres, colour coded white. White is the cue for hydrocarbon absorbents, so anyone grabbing the kit knows at a glance it is for fuel, oil and similar liquids rather than general spills. It ships in a white bag, which makes it easy to stash near a workshop bench, a fuel store or in a vehicle.

The absorbents inside are oil and fuel only. They soak up hydrocarbon liquids such as fuel, petrol, diesel, oil and solvents, and they are made to repel water at the same time. That repel-water quality is the reason these kits get used for spill recovery on water as well as on land: the pads and booms hold the hydrocarbon and let the water through. Pratt lists this kit for general industry and non industry applications, so it suits a broad range of sites.

Inside the bag you get a working spread of components rather than just loose pads: floor sweep for grinding fuel into the surface, booms to ring or steer a spill, a pillow for pooled liquid, fifteen absorbent pads, and a dust pan and brush set for the clean-up afterwards. If you want to read the full component list and confirm the current pack contents, the product page on Done Right Safety has it.

Picking the right size and type

Two questions decide whether this is the kit for you. First, what are you cleaning up? This kit is oil and fuel only, so it is built for hydrocarbons and not for a mixed bag of unknown liquids. If your site handles water-based chemicals, coolants or general process liquids as well, a universal general purpose kit will cover more of those, and you may want both rather than one. Second, how big a spill do you plan for? The 75 litre rating is a guide to the kit's absorbent capacity, so match it to the largest realistic spill at the point where you store the kit, not just the average dribble.

The white colour coding matters more than it looks. Keeping hydrocarbon (white) kit visibly separate from any general purpose (grey) kit stops people reaching for the wrong absorbent under pressure. If you run more than one spill type on site, lean into that colour system.

Using it during a spill

Work from the outside in. Lay the 1.2m booms to ring the spill or steer it away from drains and waterways first, since the white booms hold the fuel or oil while letting water pass. Drop the pillow onto any deep pool to pull up the bulk of the liquid. Then use the 300gsm pads to mop the thinner film across the surface. The floor sweep is there for grinding residue into a hard floor so you can collect it, and the dust pan and brush set is for sweeping that up at the end.

Restocking and inspection

Treat the kit as a consumable. Once you have used the pads, booms or pillow, the kit is no longer at full capacity, so log the use and reorder the parts you spent. Check the bag on a regular schedule so it is complete and dry before you actually need it. Spent hydrocarbon absorbents are contaminated waste, so bag and dispose of them according to your site's waste procedure rather than putting them back. Always confirm handling and disposal guidance on the product page or datasheet for your situation.

These are same-type spill kits, so the table below compares like with like. The differences that matter are spill type, kit size and which brand and format you prefer.

If your work is firmly fuel and oil, stay in the white-coded line. The ESKOF075 here gives you the most absorbent capacity of the Pratt oil and fuel pair, while the 50 litre ESKOF050 is the same kit cut down for tighter spaces or smaller risks. Pick the larger one where a single spill could be sizeable and the smaller one where you mostly deal with drips.

The two that change the decision are the grey ESKGP075 and the Spill Station 40L. Go grey only if you actually need to absorb a wider mix of liquids, because it is a general purpose kit rather than hydrocarbon specific. The Spill Station 40L is the one to look at if you want a compact kit for a vehicle or a decanting bay and you value that its listing cites BS5979 testing and AusSpill compliance, which the Pratt economy kits do not list.

As an everyday hydrocarbon kit, this one covers the basics well. You get booms, a pillow, fifteen pads and a floor sweep, plus a dust pan and brush, which is enough to ring a spill, lift the pool and finish the clean-up without scrambling for extra gear. The white colour coding and the water-repelling absorbents are the right call for fuel and oil work, and the bag format keeps it portable.

What is confirmed on the listing: the kit is oil and fuel only, colour coded white, designed to repel water, and made up of the components named above with their stated sizes (15L / 5kg floor sweep, 1.2m booms, 420g pillow, 300gsm pads). It is described for general industry and non industry use.

What to verify before you commit: this listing does not state any test standard or third-party rating, so if your site requires a kit to meet a particular standard, confirm that on the product page or datasheet rather than assuming it. It is also worth checking the bag's overall dimensions and the full current contents on the product page so the kit fits your storage point and your spill plan.