Pratt Economy 75L general purpose spill kit

Pratt builds this general purpose spill kit to soak up everyday liquid spills around a worksite, and colour codes it grey, the universal colour for general purpose absorbents. Grey makes the kit easy to spot and easy to keep separate from oil and fuel only stock. The "75LTR" in the name refers to the kit's absorbent capacity, so it is sized for the kind of medium spill that a floor sweep and a few pads can no longer handle on their own.

The kit is meant for all liquid spills with the exception of aggressive acids or alkalis. If your hazard is corrosive chemicals, this is not the right kit. For coolant, water based fluids, mild detergents, hydraulic oil mixed with water and the general mix of fluids that ends up on an industrial floor, it is a sensible all rounder. Pratt lists it as suitable for both general industry and non industry applications, and it turns up in automotive, industrial and commercial settings, warehousing, waste management and manufacturing.

If your site keeps a register of spill response gear, the grey general purpose kit is usually the first one people reach for, with oil and fuel only kits held alongside it for hydrocarbon work. You can see the full contents and the current listing on the Done Right Safety product page.

Choosing the right kit

The liquid you actually expect to spill decides the kit. This grey general purpose kit handles the broad mix of water based and oily fluids that collects on most floors, but it is not made for aggressive acids or alkalis, so check your safety data sheets first. If most of your risk is fuel, petrol, diesel or oil, an oil and fuel only kit (the white coded range) will repel water and float, which a general purpose kit will not do. Match the 75L capacity to the largest credible spill at that location: a single decanting bench is different to a busy loading dock.

Setting up and responding

Keep the kit somewhere obvious and close to the hazard, not locked in a back room. When a spill happens, lay the 1.2m booms first to ring the spill and stop it spreading, drop the pillow onto the heaviest pooling, then use the 300gsm pads to mop up the thinner film. The floor sweep is for grinding out the last residue on the surface, and the dust pan and brush set lets you collect the spent sweep without spreading it around.

Restocking and inspection

A spill kit is only useful if it is full. After any use, replace the booms, pillow, pads and floor sweep so the kit is ready for the next event, and check it on your normal safety walk so nothing has been quietly borrowed. Spent absorbents are contaminated waste, so dispose of them according to your site's waste procedure. For standards, ratings or disposal classifications, confirm the details on the product page or datasheet rather than assuming them, since none are listed here.

The kits compared here are all like-for-like, same type spill kits, so the comparison is genuinely apples to apples. The real decision is spill type (general purpose grey versus oil and fuel only white) and capacity.

Pick this grey 75L kit when your spills are a general mix of fluids and you want one kit that covers most of them, keeping in mind the exclusion for aggressive acids or alkalis. If your risk is specifically fuel, petrol, diesel or oil, the white oil and fuel kits are the better match because their absorbents repel water and float, which matters for spills near drains or water. The matching 75L oil and fuel kit (ESKOF075) is the closest swap if you simply want the same size in a hydrocarbon version.

Between the oil and fuel options, the premium 25L Pratt (SKOF025) is the smaller, upgraded choice for tighter spots, while the Spill Station 40L (TSSIS40OF) is a compact kit aimed at vehicles and decanting areas where 20L drums are handled. Capacity is the main lever there, so size the kit to your worst likely spill at that spot.

As a general purpose response kit, this one covers the basics well. The contents are sensible for a 75L grey kit: booms to contain, a pillow for heavy pooling, a stack of 300gsm pads for the spread, floor sweep for residue and a dust pan and brush so the clean up does not turn into a second mess. For automotive, warehousing and general manufacturing floors, it is an easy default.

The honest limit is in the name. General purpose grey absorbents are not for aggressive acids or alkalis, and they do not repel water the way the oil and fuel only range does. If your hazard leans towards corrosives or pure hydrocarbons, look at the right coded kit instead of stretching this one to fit.

What is confirmed on the listing is the colour coding, the suitability for general liquid spills, the named contents and the capacities (75L, with a 5kg / 15L floor sweep and 300gsm pads). What is not listed here is any standard, rating or certification, so if your site requires the kit to meet a particular Australian standard or carry a specific compliance mark, confirm that on the product page or datasheet before you commit.