Done Right SafetyDone Right SafetyHub
Visit the store

Force 360 day safety vest

The Force 360 day safety vest is a Class D hi-vis vest for daylight work only, with a 100% polyester body, a dual Velcro front and hi-vis stitched edge tape. The listing names AS/NZS 1906.4:2023 and AS 4602.1:2024.

Brand Force360Code CWRX198Category Hi-vis vestsLast updated 5 June 2026

Key takeaways

  • The Force 360 day safety vest is a Class D garment, which means it is rated for day use only and is not a substitute for a day/night vest.
  • The Force 360 listing states compliance with AS/NZS 1906.4:2023 and AS 4602.1:2024, which helps when a site induction asks for the standards on record.
  • The body is 100% polyester with hi-vis stitched edge tape, and the dual Velcro front lets a wearer adjust the vest without pulling it over their head.
Quick specs
SpecForce 360 (CWRX198)What to check
Visibility classClass D, day use onlyConfirm your site allows a day-only vest
Standards listedAS/NZS 1906.4:2023, AS 4602.1:2024Check the markings on the garment label
Material100% polyesterCheck the fabric suits the work environment
ClosureDual Velcro frontCheck the Velcro grips over a jacket
Reflective tapeHi-vis stitched edge tapeLook at where the tape sits in photos
Sizes and coloursNot stated in the listing factsConfirm the size range before a team order

What is the Force 360 day safety vest?

The Force 360 day safety vest is a plain hi-vis vest built to make the wearer easier to see in daylight. Force 360 lists it as a Class D garment, suitable for day use only, with a 100% polyester body, a dual Velcro front closure and hi-vis stitched edge tape around the garment.

Force 360 built this vest for one job: making the wearer easier to see in daylight. It is a Class D garment, which means it is suitable for day use only, and the listing states it is compliant to AS/NZS 1906.4:2023 and AS 4602.1:2024. If your site runs into dawn, dusk, or night work, this is not the vest for that, and you would want a day/night option instead.

Construction is straightforward. The body is 100% polyester, which the listing describes as long lasting and durable for extended use, and it closes with a dual Velcro front rather than a zip. Hi-vis stitched edge tape runs around the garment to lift visibility. For a lot of yards, depots, and traffic-adjacent work, that simplicity is the point.

If you want to confirm the colour, sizing, and exact standard markings before you commit a team order, check the Force 360 Day Safety Vest product page on Done Right Safety.

Key features

  • 100% polyester body, described as long lasting and durable for extended use
  • Dual Velcro front closure for a quick, adjustable fit
  • Hi-vis stitched edge tape to improve daytime visibility
  • Class D garment, suitable for day use only
  • Listed as compliant to AS/NZS 1906.4:2023 and AS 4602.1:2024

Where it fits

  • Daytime work where high visibility is required and there is no low-light or night component
  • Yards, warehouses, and depots that need a simple slip-on hi-vis layer
  • Visitor, contractor, or short-term crew kits where a no-frills day vest does the job
  • Roles where a Velcro front is preferred over pulling a vest over the head

Force 360 day safety vest specifications

Force 360 day safety vest specifications
SpecificationDetail
BrandForce 360
Product codeCWRX198
CategoryHi-Vis Workwear / Vests
Product typeVest
Standards or ratings listedAS/NZS 1906.4:2023, AS 4602.1:2024
Material100% polyester (described as long lasting and durable for extended use)
ClosureDual Velcro front
Reflective / edge tapeHi-vis stitched edge tape
Visibility classClass D, suitable for day use only
Product nameFORCE 360 DAY SAFETY VEST
Where to buyDone Right Safety, donerightsafety.com.au

Should you choose the Force 360 vest or a day/night vest?

Choose the Force 360 only when every shift finishes in daylight. A Class D garment relies on hi-vis stitched edge tape rather than the wide retroreflective bands used on day/night gear, so anyone working at dawn, dusk or under site lighting needs a day/night (Class D/N) vest instead.

Day use versus day/night

Get the day-versus-night question right first. The Force 360 is a Class D garment, listed as suitable for day use only, which is why it relies on hi-vis stitched edge tape rather than the wide retroreflective bands you see on day/night gear. If your crews finish in daylight every shift, that is fine. If anyone is on the tools at dawn, dusk, or under site lighting at night, pick a day/night (Class D/N) vest instead, because a day-only vest will not give you headlight reflectivity.

Getting the fit right

The dual Velcro closure makes sizing forgiving. You can cinch it tighter over a t-shirt or leave it looser over a jacket, and a wearer can put it on and take it off without lifting it over their head. Make sure the vest sits properly over the shoulders so the edge tape stays visible and is not bunched or hidden under a backpack or harness. Confirm the available sizes on the product page before ordering for a mixed crew.

Care and replacement

Polyester hi-vis fabric fades with sun and wear, and faded fluoro defeats the purpose of the vest. Keep the surface clean so the colour stays bright, and check that the Velcro still grips firmly. Once the fluoro has dulled, the edge tape is frayed, or the closure no longer holds, retire the vest and replace it. Follow any care guidance shown on the product listing or garment label.

Which day vest should you buy: Force 360, Bisley or DNC?

All three are hi-vis day vests sold by Done Right Safety, so the difference is how each one is built. The Force 360 listing names AS/NZS 1906.4:2023 and AS 4602.1:2024, the Bisley adds a taped H pattern and a longer back tail, and the DNC states a fluorescent 120gsm fabric.

The three vests here are like-for-like, same-type alternatives: each one is a hi-vis day vest from Done Right Safety, so this is a fair comparison of how each is built and closed rather than a comparison across different garment categories.

The Force 360 is the one to pick if you specifically want the standards spelled out on the listing, with AS/NZS 1906.4:2023 and AS 4602.1:2024 both named, and you are happy with a plain Velcro front. The Bisley is worth a look if you want the taped H pattern and a longer back tail for a bit more coverage when bending. The DNC is the simple fluoro option, and it is the one with a stated fabric weight of 120gsm if you care about knowing what you are getting.

For the Bisley and DNC, the standards are not listed in the comparison data, so confirm their compliance markings on each product page before you treat them as equivalent to the Force 360 on certification.

FeatureForce 360 (CWRX198)Bisley (BV0342HT)DNC (3801)
BrandForce 360BisleyDNC
Material100% polyesterSee product pageFluorescent 100% polyester
Fabric weightNot specifiedNot specified120gsm
Day or day/nightClass D, day use onlySee product pageDaytime hi-vis
Reflective / tapeHi-vis stitched edge tapeReflective taped H patternSee product page
ClosureDual Velcro frontVertical touch tape frontFront hook & loop fasteners
Standards listedAS/NZS 1906.4:2023, AS 4602.1:2024See product pageSee product page
Notable extraDay-only simplicityLonger back tailFluorescent fabric for daytime visibility
Force 360 day safety vest against similar Done Right Safety products
FeatureForce 360 (CWRX198)Bisley (BV0342HT)DNC (3801)
BrandForce 360BisleyDNC
Material100% polyesterSee product pageFluorescent 100% polyester
Fabric weightNot specifiedNot specified120gsm
Day or day/nightClass D, day use onlySee product pageDaytime hi-vis
Reflective / tapeHi-vis stitched edge tapeReflective taped H patternSee product page
ClosureDual Velcro frontVertical touch tape frontFront hook & loop fasteners
Standards listedAS/NZS 1906.4:2023, AS 4602.1:2024See product pageSee product page
Notable extraDay-only simplicityLonger back tailFluorescent fabric for daytime visibility

Is the Force 360 day safety vest worth buying?

Yes, for crews whose work finishes in daylight. The Force 360 covers the basics with a 100% polyester body, a dual Velcro front and hi-vis stitched edge tape, and the listing names both AS/NZS 1906.4:2023 and AS 4602.1:2024 for anyone who needs the standards on record.

As a day-only hi-vis vest, the Force 360 covers the basics cleanly. The polyester body, dual Velcro front, and hi-vis stitched edge tape are what you want for straightforward daytime visibility, and the listing naming both AS/NZS 1906.4:2023 and AS 4602.1:2024 is a useful signal for anyone who needs the standards on record for a site induction.

What is confirmed on the listing: 100% polyester, dual Velcro closure, stitched edge tape, Class D day-use-only rating, and the two standards above. What you should verify on the product page or datasheet: the available colours and size range, the exact garment label markings, and any care instructions, none of which are spelled out in the facts here.

The limit is built into the design. The vest is day use only. If part of your work happens in low light, it is the wrong tool and you should choose a day/night option, even though the Force 360 is a solid pick for purely daytime tasks.

Frequently asked questions

Is the Force 360 day safety vest suitable for night work?

No. Force 360 lists the vest as a Class D garment, suitable for day use only, so it carries hi-vis stitched edge tape rather than the wide retroreflective bands that give headlight reflectivity. For dawn, dusk, or night work, choose a day/night (Class D/N) vest instead of this day-only design.

What standards does the Force 360 day safety vest meet?

The listing states the vest is compliant to AS/NZS 1906.4:2023 and AS 4602.1:2024, and rates it Class D for day use only. Confirm the exact markings on the garment label or product page before relying on them for a site requirement or a site induction record.

What is the Force 360 day safety vest made from and how does it close?

The body is 100% polyester, which the listing describes as long lasting and durable for extended use, and it closes with a dual Velcro front rather than a zip. The closure makes the fit quick to adjust over a t-shirt or a jacket, and the vest goes on without lifting it over the head.

How is the Force 360 vest different from the DNC daytime hi-vis vest?

Both are daytime hi-vis vests with a front hook and loop closure. The DNC lists a fluorescent 120gsm polyester fabric, while the Force 360 listing names AS/NZS 1906.4:2023 and AS 4602.1:2024 and uses hi-vis stitched edge tape. Check the DNC product page for its standards if certification matters to you.

Does the Force 360 day safety vest come in different sizes and colours?

Sizes and colours are not specified in the information here, so check the Force 360 Day Safety Vest product page on Done Right Safety for the available options before ordering for a team. Confirm the size range covers a mixed crew and that the colour suits your site rules.

FORCE 360 Day safety vest
Product code CWRX198
Buy at Done Right Safety

Done Right Safety Team

Safety, PPE & Workwear Specialists

Written from the product real specifications, its listed AS/NZS ratings and manufacturer supplied detail. Where a listing does not state a rating, the guide says so. Read the editorial standards.

Published 5 June 2026Last reviewed 5 June 2026

Sources

  • Force 360 Day Safety Vest product listing on donerightsafety.com.au
  • AS/NZS 1906.4:2023 (Standards Australia)
  • AS 4602.1:2024 (Standards Australia)
Force 360 day safety vestCWRX198
Buy at the store
Compare 0
Compare these