King Gee Originals PVC taped jacket

The King Gee Originals PVC taped jacket is a straightforward wet weather jacket built for getting through a wet shift rather than for looking sharp. The shell is PVC on 100% polyester, so it sheds rain instead of soaking it up, and the seams are welded rather than sewn, which is the bit that usually decides whether a cheap rain jacket leaks or not.

It sits at three-quarter length, so it covers further down the thigh than a standard jacket and keeps spray off the top of your legs when you are standing in it. There is a reflective hoop around it, a detachable hood for when the weather settles, and a centre front press stud closure that you can do up one-handed with gloves on.

In short, it is a simple taped PVC rain jacket for outdoor crews who need to stay dry without fuss. You can view the full listing and size options on Done Right Safety before you commit.

Deciding if it is the right jacket

Be clear about what you are buying. The K55024 is a rain shell rather than a warm winter jacket. The PVC on polyester construction is about keeping rain out, so if your problem is cold rather than wet, you will want an insulated jacket instead. Where this one earns its place is on jobs where you are outside in the rain and need to keep moving.

The reflective hoop gives you some visibility in dull conditions, which matters on roadside and site work. If your site has a strict hi-vis or compliance requirement, check the standards on the product page first, because no specific standard is listed for this jacket.

Getting the fit and setup right

Pick a size that leaves room to layer underneath, since on a cold wet day you will likely have a jumper or hoodie on under it. The three-quarter length is intentional, so expect it to sit lower than a standard jacket. Take the hood off when it stops raining. A detachable hood is handy precisely because you are not stuck wearing it once the weather clears. The centre front press studs are quick to do up, so you can get covered fast when a shower hits.

Care and looking after it

A PVC jacket is best wiped down rather than thrown through a hot wash, since heat and harsh agitation can damage the coating and the welded seams over time. Let it dry fully before you fold it away so you are not packing damp PVC into a bag. Keep an eye on the welded seams and the press studs, as those are the first things to give out on any rain jacket, and check the reflective hoop is still intact if you rely on it for visibility. For the manufacturer's care guidance, confirm the details on the product page.

All four jackets here are wet weather jackets, so the differences below are like-for-like and worth knowing before you choose.

The closest call is between this jacket and its sibling, the King Gee Originals PVC Jacket (K55023). They share the same PVC on polyester shell, welded seams, detachable hood and right side pocket. The deciding factor is the reflective hoop on this taped version, so if visibility in poor light matters on your site, go for the taped one; if it does not, the plain version covers the same ground.

Step up to the Hard Yakka 4 in 1 (Y06057) if you want one jacket that adapts as the weather changes, since it comes with a reversible inner vest. Go for the Syzmik Storm Jacket (ZJ350) instead when you need a lined, quilted waterproof with a stated 5,000mm rating for colder, heavier rain. This King Gee taped jacket stays the simplest of the four: a single-layer rain shell with a longer cut and a reflective hoop.

What is confirmed on the listing is solid for what this jacket sets out to do. PVC on a polyester base with welded seams is a sensible build for keeping rain out, and welded rather than stitched seams is genuinely the right call for a wet weather shell. The three-quarter length, detachable hood, press stud closure and reflective hoop are all practical touches for outdoor work.

The thing to verify yourself is anything around ratings and compliance. No standard or waterproof rating is listed for this jacket, so if you need a specific hi-vis or wet weather standard for your site, confirm it on the product page or datasheet before you order rather than assuming it. Also check the available size range and colour against your team's needs.

Overall it is an honest, no-frills rain jacket. If you want something warm and insulated, look elsewhere in the range. If you want simple longer-length rain cover with a bit of reflective presence, this does the job.