JSP Typhoon 8 half mask respirator, short wide

The JSP Typhoon 8 half mask respirator comes in the short wide mask size on this listing. A reusable twin cartridge half mask covers the nose and mouth and takes a filter on each side rather than relying on a single disposable face piece. The mask body is moulded from thermoplastic rubber, and JSP lists it as available in four sizes so you can pick the one that seals best against your face shape.

The thing most people notice with a half mask is how hard it is to breathe through it. The Typhoon valve is built around low breathing resistance, with a low resistance exhalation valve to make breathing out easier across a shift. A 4 point cradle suspension holds it in place and adjusts at four points, and the buckles release quickly when you need to take it off. The body is silicone, which JSP notes performs well at very low temperatures.

The low profile, swept back shape is meant to sit close to the face so filters can be worn behind a face shield or welding visor and you keep good visibility. If you want to confirm the size and filter set before ordering, you can check the listing for this respirator on Done Right Safety.

A half mask is only as good as the seal and the filter on it, so getting both right matters more than the mask itself.

Choosing the size and filter

This particular listing is the short wide mask. JSP offers the Typhoon 8 mask in four sizes, so if your face is narrower, longer or wider than short wide, look at the other size options before you commit. The mask takes the full range of Force filters, so decide what you are protecting against first: particulates only, or gases and vapours as well. The hazard and your local risk assessment drive the filter choice, not the other way around. Some Force filters use PressToCheck to help you check the seal each time you fit the mask.

Fitting and checking the seal

Adjust the 4 point cradle so the mask sits evenly and the seal contacts clean skin all the way around. Facial hair under the seal breaks it, so that is worth sorting before you rely on the mask. Do a user seal check every time you put it on. A proper fit test should be carried out per your workplace requirements; this guide does not replace one.

Cleaning, inspection and replacement

JSP designed the Typhoon 8 around a small number of key parts so it comes apart easily for cleaning. Wipe it down after use, inspect the valves and the mask body for damage or perishing, and replace any worn parts, since replacement parts are available. Filters are consumables: change them on the schedule set by your risk assessment or when breathing resistance rises or you notice odour or taste breakthrough, depending on the filter type.

Every option in the comparison is the same Typhoon 8 twin cartridge half mask, so the mask body, valve and harness are identical. The real difference is whether you buy the mask on its own or as a pack with filters already chosen, and which filter that is.

If you already hold the right Force filters, the bare short wide mask is the simple buy. If you are kitting out a job from scratch, pick the pack whose bundled filters match your task: the P2, A2P2 or ABEK1P2 version, after you have checked what each of those filters is rated against.

Filter codes describe what each filter is rated against, so the choice comes down to which filter set is bundled on day one. Confirm the exact rating and what it covers on each product page before you order.

What the listing confirms is solid. This is a reusable twin cartridge half mask with the Typhoon valve aimed at low breathing resistance, a 4 point adjustable harness with quick release buckles, and a thermoplastic rubber mask offered in four sizes. It conforms to AS/NZS 1716 and is built to come apart easily for cleaning, with replacement parts available. The low profile shape behind a visor and the silicone body's cold tolerance are genuine points for welders and anyone working in the cold.

The choice that actually matters sits one step away from the mask: the filters. This SKU is the bare short wide mask, so you supply the Force filters that suit your hazard. That is a strength if you already standardise on Force filters, and something to plan for if you do not. You can review the full listing on the Done Right Safety product page before deciding.

A few things are worth verifying on the product page or datasheet rather than assuming. Confirm the short wide size suits your face, since fit is individual and a fit test is the real proof. Check which Force filters and ratings you need for your task, and confirm the AS/NZS 1716 conformity details on the listing. Treat this guide as a shortlist aid, not a substitute for your own risk assessment.