Done Right SafetyDone Right SafetyHub
Visit the store

Bison Ridge slip-on safety boot

The Bison Ridge is a steel toe work boot that pulls on with reinforced elastic side gussets instead of laces, over a hard wearing TPU outsole Bison rates for grip and chemical resistance. No safety standard is listed on this pack, so confirm any certification your site requires on the product page.

Brand BisonCode RIDGECategory Elastic sided work bootsLast updated 5 June 2026

Key takeaways

  • The Bison Ridge is a steel toe slip-on work boot that uses reinforced elastic side gussets instead of laces.
  • Bison rates the hard wearing TPU outsole for good resistance to a range of chemicals and grip, over an anti hydrolysis PU midsole for impact absorption.
  • A wide fit sole sizing and the SDVS self venting footbed target roomier feet and long shifts on hard ground.
  • No safety standard or rating is listed for the Ridge, so confirm any certification you rely on before ordering.
Quick specs
SpecBison RidgeWhat to check
Toe protectionSteel toe capConfirm a steel toe is allowed on site
ClosureSlip-on with reinforced elastic side gussetsCheck the heel is held without lifting
OutsoleHard wearing TPU, chemical resistant, good gripMatch the grip to your working surfaces
MidsoleAnti hydrolysis PU for impact absorptionCheck the cushioning suits long shifts
FitWide fit sole sizingCompare the wide last with your usual size
Standards listedNot specified, confirm on listingCheck the listing or datasheet for certification

What is the Bison Ridge slip-on safety boot?

The Bison Ridge is a slip-on work boot with a steel toe cap and reinforced elastic side gussets, so it pulls on and off without laces. Underfoot, an anti hydrolysis PU midsole and hard wearing TPU outsole handle impact, abrasion, grip and chemical resistance, with a moulded footbed for comfort.

Bison builds the Ridge around reinforced elastic side gussets, so it pulls on and off without laces. That suits trades and site workers who are in and out of their boots through the day, or anyone who would rather not stop to re-lace.

It carries a steel toe cap for front-of-foot protection and a hard wearing TPU outsole that Bison rates for good chemical resistance and grip. Underfoot there is an anti hydrolysis PU midsole paired with the TPU outsole for impact absorption, plus a moulded footbed for comfort across a long shift.

Bison has also given the Ridge a wide fit sole and a self venting footbed system to help with heat and moisture. If those features line up with your work, you can view the Ridge on the Done Right Safety store to check sizing and the current listing.

Key features

  • Steel toe cap for front-of-foot protection
  • Reinforced elastic side gussets for easy on and off, no laces
  • Hard wearing TPU outsole rated for good chemical resistance and grip
  • Anti hydrolysis PU midsole and TPU outsole for impact absorption and abrasion resistance
  • Self Dispersing Venting System (SDVS) footbed and breathable lining to disperse heat and reduce moisture
  • Moulded footbed for comfort
  • Wide fit sole sizing to maximise surface area grip and reduce rub zones

Where it fits

  • Workers who get in and out of their boots repeatedly and want a quick pull-on style
  • Trades and general site work needing a steel toe and a grippy, chemical-resistant outsole
  • Long shifts on hard surfaces where underfoot cushioning and heat dispersion matter
  • Wider feet looking for a wide fit last rather than a narrow lace-up

Bison Ridge slip-on safety boot specifications

Bison Ridge slip-on safety boot specifications
SpecificationDetail
BrandBison
Product codeRIDGE
CategoryWork Boots / Elastic Sided
Product typeWork boots
Toe protectionSteel toe cap
ClosureSlip-on with reinforced elastic side gussets
OutsoleHard wearing TPU, good resistance to a range of chemicals and grip
MidsoleAnti hydrolysis PU for impact absorption
Sole constructionAnti hydrolysis PU midsole and TPU outsole for impact absorption and proven TPU abrasion resistance
FootbedMoulded footbed for comfort
VentilationSelf venting footbed base, SDVS (Self Dispersing Venting System) and breathable lining to disperse heat and reduce moisture
FitWide fit sole sizing to minimise trip hazards, reduce rub zones and maximise surface area grip
Product nameBISON RIDGE SLIP ON SAFETY BOOT
Where to buyDone Right Safety, donerightsafety.com.au

How should you size and care for the Bison Ridge?

Bison builds the Ridge on a wide fit last, so check it against your usual size and make sure the gusset holds your foot without the heel lifting. Rinse chemicals and debris off the TPU outsole, and replace the boot once the tread wears smooth or the gussets stretch.

Deciding if a slip-on suits your work

The Ridge leans on elastic side gussets instead of laces, so the call is mostly about how you work. If you cross thresholds where boots have to come off, or you want to get them on fast in the morning, a slip-on earns its keep. If you need to dial in tension over the instep, a lace-up gives you more adjustment. The steel toe and TPU outsole are the safety-relevant parts, so match those to your task first.

Getting the size and fit right

This is a wide fit last, which helps if standard boots pinch across the ball of the foot, but it is worth checking against your usual size. With an elastic-sided boot the gusset does the holding, so you want the foot held without the heel lifting. The moulded footbed and breathable lining are aimed at comfort and moisture over a long day. Standards and ratings are not listed on this pack, so confirm any certification you rely on directly on the product page or datasheet before you buy.

Care and when to replace

Keep the outsole clear of built-up debris so the tread keeps biting, and rinse off chemicals or muck rather than letting them sit on the TPU. The midsole and outsole are built for abrasion and impact, but cushioning fades with mileage. If the tread is worn smooth, the gussets have stretched out, or the toe cap has taken a heavy hit, treat the boot as due for replacement.

How does the Bison Ridge compare with the Dune, Mongrel and Hydrogen?

Choose the Ridge for the simplest pull-on with a wide fit and a TPU outsole Bison rates for chemicals and grip. The Bison Dune adds a zip and lace low cut with an SRC slip rating, the Mongrel lists arch support and AS/NZS 2210.3, and the Ergonx Hydrogen uses a composite toe.

The table lines up three other steel or composite toe work boots from Done Right Safety against the Ridge on the points that decide a purchase. Products are columns, comparison points are rows.

Pick the Ridge if you want the simplest pull-on with a wide fit and a TPU outsole that Bison rates for chemicals and grip. The Bison Dune is the move if you would rather have a zip and lace low-cut with a stated SRC slip rating on its listing, and the Mongrel slip-on suits buyers who want arch support and a listed AS/NZS standard in the same easy-on format.

The Ergonx Hydrogen is the one to look at when you need a composite, metal-free toe rather than steel, for example airport-side work or a lighter feel. The Ridge keeps things straightforward with its steel toe and venting footbed, so the choice comes down to whether you value the composite toe and arch features the others list, or the plain wide-fit, slip-on simplicity here.

FeatureBison (RIDGE)Bison (DUNE)Mongrel (315085)Ergonx (HYDROGEN)
BrandBisonBisonMongrelErgonx
Toe capSteel toe capSee product page200J steel toe capSteel toe equivalent composite (airport friendly)
ClosureSlip-on, reinforced elastic side gussetsZip side with lace combinationSlip-on with elastic gussetSlip-on
OutsoleHard wearing TPU, chemical resistant, good gripNitrile rubber, SRC slip rating 300C outsoleSlip, oil and fat resistant TPU/PU ToughSiderSee product page
Midsole / cushioningAnti hydrolysis PU midsole, moulded footbedEVA midsole, lighter and more flexibleOrthoTec Air footbed with anatomical arch supportLightweight, aimed at all-day comfort
VentilationSDVS self venting footbed and breathable liningInnovative self venting footbed baseTemperature regulating liningSee product page
FitWide fit sole sizingWide fitting lastSee product pageSee product page
Standards listedNot specified, confirm on listingNot specified, confirm on listingAS/NZS 2210.3.2009Not specified, confirm on listing
Best forFast on/off, wide feet, chemical-resistant gripLow-cut zip and lace with a slip rating on the listingSlip-on comfort with arch support and a listed standardComposite toe for metal-free or lightweight needs
Bison Ridge slip-on safety boot against similar Done Right Safety products
FeatureBison (RIDGE)Bison (DUNE)Mongrel (315085)Ergonx (HYDROGEN)
BrandBisonBisonMongrelErgonx
Toe capSteel toe capSee product page200J steel toe capSteel toe equivalent composite (airport friendly)
ClosureSlip-on, reinforced elastic side gussetsZip side with lace combinationSlip-on with elastic gussetSlip-on
OutsoleHard wearing TPU, chemical resistant, good gripNitrile rubber, SRC slip rating 300C outsoleSlip, oil and fat resistant TPU/PU ToughSiderSee product page
Midsole / cushioningAnti hydrolysis PU midsole, moulded footbedEVA midsole, lighter and more flexibleOrthoTec Air footbed with anatomical arch supportLightweight, aimed at all-day comfort
VentilationSDVS self venting footbed and breathable liningInnovative self venting footbed baseTemperature regulating liningSee product page
FitWide fit sole sizingWide fitting lastSee product pageSee product page
Standards listedNot specified, confirm on listingNot specified, confirm on listingAS/NZS 2210.3.2009Not specified, confirm on listing
Best forFast on/off, wide feet, chemical-resistant gripLow-cut zip and lace with a slip rating on the listingSlip-on comfort with arch support and a listed standardComposite toe for metal-free or lightweight needs

Is the Bison Ridge slip-on safety boot worth buying?

Bison lists the Ridge as a steel toe slip-on with reinforced elastic gussets, a hard wearing TPU outsole and an anti hydrolysis PU midsole, which suits fast on and off in a roomy fit. No safety standard is stated, so verify any certification your site requires before ordering.

On the listing, the Ridge is a clear, no-fuss proposition: a steel toe slip-on with reinforced elastic gussets, a hard wearing TPU outsole rated for chemical resistance and grip, and an anti hydrolysis PU midsole for impact absorption. The wide fit sole and the SDVS venting footbed with breathable lining are the comfort and climate features Bison calls out, and they read as genuinely useful for long days on hard ground.

What is confirmed is the construction and the steel toe. What is not stated on this pack is any safety standard or rating, so if your site requires a specific certification, verify it on the Done Right Safety product page or the datasheet before ordering. Sizing in a wide fit last is also worth checking against your usual boot, since the gusset and not laces does the holding.

Overall it is a sensible pick for someone who wants speed of on and off, a roomy fit, and a grippy, chemical-resistant sole, without paying for features they will not use.

Frequently asked questions

Does the Bison Ridge have a steel toe?

Yes. The listing gives the Ridge a steel toe cap for front-of-foot protection. If you need a metal-free toe instead, a composite-toe boot is the alternative to look at: the comparison lists the Ergonx Hydrogen with a steel toe equivalent composite that is described as airport friendly.

How does the Bison Ridge stay on without laces?

Reinforced elastic side gussets do the work: you pull the boot on and off, and the elastic holds it in place. There is no lacing to adjust, which is the main appeal for people who are in and out of their boots often. Check the heel is held without lifting.

Is the Bison Ridge outsole slip and chemical resistant?

Bison describes the TPU outsole as hard wearing, with good resistance to a range of chemicals and superb grip. Specific slip ratings are not listed on this pack, so confirm any rating you need on the Done Right Safety product page or the manufacturer datasheet before you order.

Does the Bison Ridge suit wider feet?

Bison uses a wide fit sole sizing on the Ridge, aimed at reducing rub zones, minimising trip hazards and maximising surface area grip, so it runs roomier than a narrow last. Check it against your usual size, and make sure the gusset holds the heel down without lifting.

How does the Bison Ridge compare with the Mongrel slip on safety shoe?

Both are easy-on slip-on safety boots with a steel toe and a TPU-based outsole. The Mongrel adds an OrthoTec Air footbed with anatomical arch support and lists AS/NZS 2210.3, while the Ridge focuses on a wide fit last, SDVS venting and a chemical-resistant TPU outsole. Choose on the arch support and listed standard, or the simpler wide fit.

Are any safety standards listed for the Bison Ridge?

No safety standard or rating is listed on this pack for the Ridge, unlike the Mongrel comparison entry that carries AS/NZS 2210.3. If you rely on a particular certification, confirm it on the Done Right Safety product page or the manufacturer datasheet before you buy.

BISON ridge slip on safety boot
Product code RIDGE
Buy at Done Right Safety

Done Right Safety Team

Safety, PPE & Workwear Specialists

Written from the product real specifications, its listed AS/NZS ratings and manufacturer supplied detail. Where a listing does not state a rating, the guide says so. Read the editorial standards.

Published 5 June 2026Last reviewed 5 June 2026

Sources

  • Bison product listing on donerightsafety.com.au
Bison Ridge slip-on safety bootRIDGE
Buy at the store
Compare 0
Compare these