Done Right SafetyDone Right SafetyHub
Visit the store

Skechers Arch Fit 2.0 mens non safety work boot

The Skechers Mens Arch Fit 2.0 is a non safety lace up work boot with a durable mesh and leather overlay upper over a shock absorbing, well cushioned midsole on a 1 3/4 inch heel. The boot is listed in US sizing, so convert before you order.

Brand SkechersCode 200331Category Non safety work bootsLast updated 5 June 2026

Key takeaways

  • The Skechers Mens Arch Fit 2.0 is a non safety work boot with no protective toe cap, so it does not suit sites that mandate one.
  • The upper pairs durable mesh with a leather overlay and laces at the front, over a shock absorbing, well cushioned midsole with a 1 3/4 inch heel.
  • The listing uses US sizing, so convert on the size chart before ordering from Done Right Safety.
  • No standard or rating is listed against this boot, so confirm any requirement on the product page or datasheet.
Quick specs
SpecArch Fit 2.0What to check
Product typeNon safety work boot, no toe capConfirm your site allows a non safety boot
UpperDurable mesh with a leather overlayCheck water resistance on the product page
ClosureLace up frontCheck the hold across your midfoot
MidsoleShock absorbing, well cushionedConfirm outsole grip or slip rating
Heel height1 3/4 inchCompare with the boots you wear now
SizingUS sizing, convert before orderingCheck the size chart on the listing

What is the Skechers Arch Fit 2.0 work boot?

The Skechers Mens Arch Fit 2.0 is a non safety men's work boot sold through Done Right Safety in the Work Boots range under Non Safety. Comfort is the point rather than toe protection: a durable mesh upper with a leather overlay laces at the front, over a shock absorbing, well cushioned midsole.

The Skechers Mens Arch Fit 2.0 is a non safety work boot built around all day comfort rather than toe protection. It sits in the Done Right Safety Work Boots range under the Non Safety category, so think of it as a comfortable everyday boot for trades and roles where a protective toe cap is not required.

The upper combines a durable mesh with a leather overlay and laces up at the front, which gives you a familiar, adjustable hold across the foot. Underfoot, a shock absorbing and well cushioned midsole carries the Arch Fit name, with a 1 3/4 inch heel height that lifts the heel a little for support on hard floors and long shifts.

One thing to flag up front: this boot uses US sizing, so check the size chart for conversion before you order. If you want the full listing and sizing detail, you can view the Arch Fit 2.0 on the Done Right Safety store.

Key features

  • Durable mesh upper with a leather overlay for added structure
  • Lace up front for an adjustable hold across the foot
  • Shock absorbing, well cushioned midsole
  • 1 3/4 inch heel height
  • Skechers and Arch Fit logo details
  • US sizing, so check the size chart for conversion

Where it fits

  • Trades and roles where a safety toe is not mandated and comfort matters most
  • Long shifts on hard floors where underfoot cushioning helps reduce fatigue
  • Light duty site work, warehouse, retail and service jobs without a toe protection requirement
  • A comfortable everyday boot you can keep on from the start of the shift to the end

Skechers Arch Fit 2.0 mens non safety work boot specifications

Skechers Arch Fit 2.0 mens non safety work boot specifications
SpecificationDetail
BrandSkechers
Product code200331
CategoryWork Boots / Non Safety
Product typeWork boots (non safety)
UpperDurable mesh with a leather overlay
ClosureLace up front
MidsoleShock absorbing, well cushioned
Heel height1 3/4 inch
BrandingSkechers and Arch Fit logo details
SizingUS sizing, check the size chart for conversion
Standards or ratings listedNone listed on this guide. Confirm any ratings on the product page or datasheet.
Product nameSKECHERS MENS ARCH FIT 2.0
Where to buyDone Right Safety, donerightsafety.com.au

How do you get the size and fit right on the Arch Fit 2.0?

Sizing comes first, because the Arch Fit 2.0 is listed in US sizes rather than Australian ones. Pull up the size chart on the Done Right Safety product page and convert before ordering, then use the lace up front to adjust the hold across your midfoot once the length and width are right.

The Arch Fit 2.0 is a non safety boot, so the first thing to be clear on is whether your site or role actually requires a protective toe cap. If it does, this is not the boot for that job. If it does not, then the decision comes down to comfort, fit and how the upper holds up to your day.

Getting the size right

The listing is in US sizing, which trips a lot of buyers up. Do not assume your usual Australian size carries straight across. Pull up the size chart on the product page and convert before you order. With a lace up front you have some scope to adjust the hold across the midfoot, but starting from the right length and width still matters most.

Comfort and the Arch Fit midsole

The selling point here is the cushioned, shock absorbing midsole and the 1 3/4 inch heel. If you spend most of the day standing or walking on concrete, that underfoot cushioning is the feature you are paying for. Lace the boot snug enough that your heel stays seated and is not sliding as you walk, since that is where the cushioning does its best work.

Caring for the upper

The upper mixes mesh with a leather overlay, so treat it gently. Knock off mud and dust before it dries in, and let the boot air out between shifts rather than drying it hard against a heater. Keep an eye on the lace eyelets and the midsole over time, and confirm any cleaning or water resistance detail on the product page, since none of that is stated on this guide.

How does the Arch Fit 2.0 compare to other non safety work boots?

Four men's non safety boots sit side by side below, so the differences are real choices. The Arch Fit 2.0 leads on underfoot cushioning and a simple lace up fit, while the King Gee and Magnum add side zippers and a listed standard, and the Blundstone steps in with an elastic side.

The boots below are like-for-like, same type men's non safety work boots, so the comparison is genuinely comparable. Where a product lists a feature the Arch Fit 2.0 does not, that difference is the reason you would pick one over the other.

If your priority is underfoot comfort and a simple lace up fit, the Arch Fit 2.0 makes the case for itself. Choose the King Gee or the Magnum if you want a leather or microfibre boot with a side zip for quick on and off, and note that both of those carry a listed AS/NZS standard while the Skechers does not.

The Blundstone is the one to look at if you prefer a classic pull on leather boot with a steel shank for step flex and torsional stability. It trades the lace adjustment of the Skechers for the convenience of an elastic side, so it really comes down to whether you want to lace up or step in.

FeatureSkechers (200331)King Gee (K27184)Magnum (MPN650)Blundstone (659)
BrandSkechersKing GeeMagnumBlundstone
UpperMesh with leather overlayWater resistant full grain leatherClarino microfibre, breathableFull grain leather, V cut
ClosureLace up frontQuick release side zipperYKK side zipperElastic side, pull on
Water resistanceNot specifiedWater resistant leatherMag Dri waterproof, breathable membraneNot specified
CushioningShock absorbing cushioned midsolePopcorn PU memory foam footbedContoured MPACT POWER PU insoleXRD impact tech, PU midsole, removable footbed
Standard listedNot specifiedAS 2210.5:2019AS/NZS 2210.3:2019Not specified
Safety toeNone (non safety)None (non safety)None (non safety toe)None (non safety)
Best forAll day cushioned comfort, easy lace fitLeather boot with quick on/off and ankle supportWet conditions and easy donningClassic pull on leather with torsional stability
Skechers Arch Fit 2.0 mens non safety work boot against similar Done Right Safety products
FeatureSkechers (200331)King Gee (K27184)Magnum (MPN650)Blundstone (659)
BrandSkechersKing GeeMagnumBlundstone
UpperMesh with leather overlayWater resistant full grain leatherClarino microfibre, breathableFull grain leather, V cut
ClosureLace up frontQuick release side zipperYKK side zipperElastic side, pull on
Water resistanceNot specifiedWater resistant leatherMag Dri waterproof, breathable membraneNot specified
CushioningShock absorbing cushioned midsolePopcorn PU memory foam footbedContoured MPACT POWER PU insoleXRD impact tech, PU midsole, removable footbed
Standard listedNot specifiedAS 2210.5:2019AS/NZS 2210.3:2019Not specified
Safety toeNone (non safety)None (non safety)None (non safety toe)None (non safety)
Best forAll day cushioned comfort, easy lace fitLeather boot with quick on/off and ankle supportWet conditions and easy donningClassic pull on leather with torsional stability

Is the Skechers Arch Fit 2.0 worth buying?

Confirmed facts on the listing are modest: a non safety lace up men's boot with a mesh and leather overlay upper, a cushioned shock absorbing midsole and a 1 3/4 inch heel. Water resistance, slip rating, outsole grip and any standard are not stated, so check the product page before you order.

What the listing confirms is straightforward: this is a non safety, lace up men's work boot with a mesh and leather overlay upper and a cushioned, shock absorbing midsole carrying a 1 3/4 inch heel. The Arch Fit branding points to comfort as the headline, and for a role without a toe protection requirement that is a reasonable thing to prioritise.

What you should verify on the product page is the sizing, since the boot is sold in US sizes and needs converting, plus anything to do with water resistance, slip rating or outsole grip, none of which is stated here. There is no standard listed against this boot on this guide either, so if your workplace asks for a rated boot, confirm that on the product page or datasheet before you commit.

For a comfortable everyday boot where a safety toe is not on the table, it is an easy one to shortlist. Just go in with the right size converted and clear eyes on what it does and does not claim.

Frequently asked questions

Is the Skechers Arch Fit 2.0 a safety boot?

No. The Arch Fit 2.0 sits in the Non Safety category at Done Right Safety, so it carries no protective toe cap. Roles and sites that mandate a rated safety toe need a boot listed under a safety category instead, so check your workplace requirement before ordering this one.

What sizing does the Skechers Arch Fit 2.0 use?

The Arch Fit 2.0 is listed in US sizing, so your usual Australian size may not carry straight across. Check the size chart on the Done Right Safety product page and convert before ordering. The lace up front then lets you adjust the hold across the foot once the length is right.

What is the Skechers Arch Fit 2.0 upper made from?

Durable mesh with a leather overlay makes up the upper, and it laces at the front for an adjustable hold across the foot. Water resistance and any cleaning or treatment detail are not stated on this guide, so confirm those on the Done Right Safety product page before you buy.

How does the Arch Fit 2.0 compare to the King Gee N Force Hybrid?

Both are men's non safety boots. The King Gee N Force Hybrid uses a water resistant full grain leather upper with a quick release side zipper and carries a listed AS 2210.5:2019 standard, while the Arch Fit 2.0 leads with its cushioned midsole and a simple lace up fit and has no standard listed here.

What is the heel height on the Skechers Arch Fit 2.0?

Heel height is 1 3/4 inch, sitting on the shock absorbing, well cushioned midsole that carries the Arch Fit name. The lift is aimed at support on hard floors and long shifts. Confirm the measurement on the Done Right Safety product page if it matters for your fit.

Is the Skechers Arch Fit 2.0 good for long shifts on hard floors?

Long shifts on hard floors are what the cushioned, shock absorbing midsole is aimed at, alongside the 1 3/4 inch heel. Lace the boot snug so your heel stays seated rather than sliding as you walk, since that is where the cushioning does its best work.

SKECHERS mens arch fit 2.0
Product code 200331
Buy at Done Right Safety

Done Right Safety Team

Safety, PPE & Workwear Specialists

Written from the product real specifications, its listed AS/NZS ratings and manufacturer supplied detail. Where a listing does not state a rating, the guide says so. Read the editorial standards.

Published 5 June 2026Last reviewed 5 June 2026

Sources

  • Skechers Arch Fit 2.0 product listing on donerightsafety.com.au
Skechers Arch Fit 2.0 mens non safety work boot200331
Buy at the store
Compare 0
Compare these