JSP Typhoon 8 half mask respirator pack with P2 filters

The pack supplies the JSP Force Typhoon 8 twin cartridge half mask with P2 filters, so it lands ready to wear for dust and particulate jobs. The mask body is the same Typhoon 8 platform JSP builds across the range: a thermoplastic rubber face piece with a 4 point cradle suspension and quick release buckles. Compliance is to AS/NZS 1716, the Australian and New Zealand standard for respiratory protective devices.

The thing most buyers notice first is the Typhoon valve and the low breathing resistance that comes with it. JSP keeps the component count down on purpose, so there is less to fiddle with and less to fail. The swept back, low profile shape is the other selling point: the mask sits close to the face so the filters tuck in behind a faceshield or a welding visor without fouling.

P2 filters ship in this pack. Where a hazard needs a different filter class, JSP supplies the same mask in other Typhoon 8 packs, covered in the comparison below. Confirm exactly what the P2 filters cover for your job, then check the current listing details on the Done Right Safety product page.

Matching the filter to the hazard

Filter choice is the first decision, and it is the main thing that separates the Typhoon 8 packs from each other. P2 filters come in this pack. Other Typhoon 8 packs ship with different filter classes on the same mask body. Work out your actual hazard first, confirm which filter class covers it, then pick the pack that carries the right filter. The product page lists the filter supplied with each pack.

Getting a seal and checking fit

A half mask only protects you if it seals against your face. Adjust the 4 point cradle suspension evenly so the mask sits firm without pinching, and use the quick release buckles to set a repeatable tension. The PressToCheck filters are designed to make the seal check quick: do it every time you put the mask on, before you start work. Facial hair along the seal line will break the seal, so the mask suits clean shaven wearers. Confirm any fit testing and sizing guidance on the product page or datasheet.

Cleaning, inspection and replacement

The Typhoon 8 is built to come apart, which is the point of a reusable mask. Disassemble it to clean the face piece, and inspect the valve and the suspension for wear before reuse. The encapsulated P2 filters can be cleaned and reused for longer life, but they are not forever: replace them when breathing gets harder or the filter is damaged or contaminated. Replacement parts and filters are available, so keep spares on hand rather than waiting for one to fail mid job.

These are like-for-like, same type alternatives: all three are the same JSP Typhoon 8 half mask, and the real difference is the filter that comes in the pack.

The mask is identical across all three, so the decision is really about which filter pack you order. They differ by filter designation: P2 in this pack, A2P2 in the BHT0B3 pack, and ABEK1P2 in the BHT0C3 pack. Match the filter to the hazard you are protecting against, and confirm the exact protection each filter class covers on the relevant Done Right Safety product page before you buy.

One practical note: because the face piece is shared, a workplace running several of these can standardise on the Typhoon 8 mask and just stock the filter that suits each task. That keeps fit testing and spares consistent across the crew.

For dust and particulate work, the Typhoon 8 is an easy mask to recommend. The platform is well sorted: low breathing resistance, a 4 point cradle that actually adjusts, and a low profile shape that genuinely does sit behind a visor. Supplied with P2 filters, it covers the common particulate jobs without you having to source filters separately.

What is confirmed on the listing: compliance with AS/NZS 1716, the thermoplastic rubber face piece, the Typhoon valve and low resistance exhalation valve, the 4 point quick release suspension, and PressToCheck encapsulated P2 filters that can be cleaned and reused. The listing also notes the mask is built to disassemble for cleaning with replacement parts available.

What to verify before you commit: mask sizing and fit for your face, fit testing requirements for your workplace, filter replacement intervals for your particular exposure, and that the P2 filter class covers your specific hazard. Check the current details on the Done Right Safety product page or the JSP datasheet.