Hard Yakka Puffa 2.0 vest

The Hard Yakka Puffa 2.0 vest is an insulated work vest built for cooler starts and exposed sites where a full jacket is too much but a base layer is not enough. It uses 3M Thinsulate insulation behind a 90gsm polyester outer with a PU coating, so it carries real warmth without a bulky look.

The body and sleeve panels are made from 150gsm recycled polyester, and the outer shell adds the PU coating for a bit of weather resistance. Hard Yakka has also given it an excellent UPF 50+ rating that complies with AS/NZS 4399:1996 for sun protection clothing, which matters if your crew spends long stretches outdoors. You can read the full listing and check current colour and size options on the Done Right Safety product page.

Practical touches round it out: a front lower pocket plus a right hand chest zip pocket for secure storage, reflective enhanced visibility logo prints, and a curved back hem that drops a little lower for added cover.

Choosing the right warmth and cover

A vest like this earns its place when you want core warmth but still need full arm movement. The 3M Thinsulate fill gives insulation without the puff of a heavy jacket, so it suits trades that are constantly reaching, climbing or handling tools. If your work is genuinely wet rather than just damp, treat the PU coating as light weather resistance only and confirm any waterproof claim on the product page.

Layering and fit

Plan to wear it as a mid layer over a shirt, or under a shell when the weather closes in. Because the outer is a slim 90gsm polyester with insulation behind it, leave a little room when you size so a base layer fits underneath comfortably. The curved back hem sits lower at the rear, which helps when you bend or crouch. Check the size range on the Done Right Safety listing before you order.

Care and longevity

The listing does not spell out wash instructions, so follow the care label on the garment for the insulation and PU coating. To keep the reflective logo prints clear, avoid harsh scrubbing over those areas. Inspect the zip pockets now and then, since a zip that fails is the usual first weak point on a working vest.

The four vests below are like-for-like same type vests from the Done Right Safety range. The two closest matches are the other insulated puffer style vests, while the Bisley soft shell sits alongside as a warmth vest with a different shell approach.

If your main need is warmth with full arm movement and you want sun cover on the listing, the Hard Yakka is the only one of these four with a stated UPF 50+ rating and 3M Thinsulate fill. The Syzmik makes sense when a removable hood matters, and the plain Bisley puffer is a straightforward insulated option without the extra features.

When wet weather is the bigger concern than warmth, the Bisley soft shell is the standout, since it is the only one here with a stated waterproof figure of up to 8,000mm H2O and a breathable membrane. The trade off is that its fleece backed warmth is different in character to a Thinsulate puffa, so pick based on whether warmth or weather is your priority.

The Puffa 2.0 reads as a sensible cold weather vest for outdoor trades. The combination confirmed on the listing is the genuinely useful part: 3M Thinsulate fill for warmth without bulk, a 90gsm PU coated outer, 150gsm recycled polyester panels, and a UPF 50+ rating that complies with AS/NZS 4399:1996. That sun protection compliance is a real point of difference against most plain work vests.

The pocket layout is modest, a front lower pocket plus a right hand chest zip pocket, so if you carry a lot you may want to check whether that suits your day. The reflective element is logo prints for enhanced visibility, which is not the same as a certified hi vis garment, so do not treat it as one.

Before ordering, confirm the available sizes and colours on the Done Right Safety product page, and check the care label for washing the insulation and PU coated shell. Any weather resistance beyond the PU coating should be verified on the listing rather than assumed.