Spill Station aerosol storage cage, 100 can
The Spill Station aerosol storage cage (TSSAC100) holds up to 100 pressurised aerosol cans across two storage levels behind a single door, in a ventilated powder-coated steel body. The unit ships flatpack for delivery and assembly on site.
Key takeaways
- The Spill Station TSSAC100 holds up to 100 aerosol cans across two storage levels behind a single door.
- The cage is powder-coated steel, measures 880mm (H) x 820mm (W), and arrives flatpack for assembly on site.
- A purpose-built cage disperses any leaking propellant, keeps cans away from ignition sources and contains them if a can fails.
| Spec | This SKU | What to check |
|---|---|---|
| Capacity | Up to 100 aerosol cans | Count the cans you need to store |
| Levels | 2 storage levels, 1 door | Confirm both levels suit your can sizes |
| Construction | Powder-coated steel | Confirm the finish on the product photo |
| Dimensions | 880mm (H) x 820mm (W) | Measure your floor space before ordering |
| Delivery | Flatpack | Confirm flatpack delivery and who assembles it |
What is the Spill Station aerosol storage cage 100 can?
The Spill Station aerosol storage cage (TSSAC100) is a ventilated, powder-coated steel cage that holds up to 100 pressurised aerosol cans across two storage levels behind a single door. Measuring 880mm (H) x 820mm (W), the unit ships flatpack for delivery and assembly on site.
Ventilated steel storage that keeps up to 100 pressurised aerosol cans safely contained.
Dedicated storage for pressurised aerosols
The Spill Station Aerosol Storage Cage (TSSAC100) holds up to 100 aerosol cans across two storage levels behind a single door, in a powder-coated steel cage. Aerosols are pressurised and most contain flammable propellants, so storing them in a dedicated, ventilated cage rather than loose on shelves reduces fire risk and keeps them organised and secure. The unit ships flatpack for easy delivery and assembly.
Key features
- Capacity: Up to 100 aerosol cans
- Levels: 2 storage levels, 1 door
- Construction: Powder-coated steel
- Dimensions: 880mm (H) x 820mm (W)
- Product type: site safety product
Where it fits
- Listed under site safety equipment at Done Right Safety
- Compare against the alternatives in the same category before ordering
Spill Station aerosol storage cage, 100 can specifications
| Specification | Detail |
|---|---|
| SKU | TSSAC100 |
| Brand | Spill Station |
| Category | Storage (Workplace Safety) |
| Capacity | Up to 100 aerosol cans |
| Levels | 2 storage levels, 1 door |
| Construction | Powder-coated steel |
| Dimensions | 880mm (H) x 820mm (W) |
| Delivery | Flatpack |
| Product code | TSSAC100 |
| Product type | site safety product |
| Where to buy | Done Right Safety, donerightsafety.com.au |
Why do aerosols need a dedicated cage, and where should it sit?
Aerosol cans pair a pressurised container with a usually flammable propellant, so heat or damage can make them rupture or ignite. A purpose-built cage ventilates any leaking propellant, keeps cans away from ignition sources and contains them if a can fails, which supports safer dangerous-goods housekeeping in workshops, stores and warehouses.
Aerosol cans combine a pressurised container with a usually flammable propellant, so heat or damage can cause them to rupture or ignite. A purpose-built cage provides ventilation to disperse any leaking propellant, keeps cans away from ignition sources, and contains them if a can fails, all of which support safer dangerous-goods housekeeping in workshops, stores and warehouses.
Siting and good practice
Locate the cage in a well-ventilated area away from heat, direct sun and ignition sources, keep it secured and the contents within the manufacturer's capacity, and segregate aerosols from incompatible goods. Always check your own dangerous-goods obligations and Safety Data Sheets for the products you store.
Frequently asked questions
How many aerosol cans does the Spill Station cage hold?
Up to 100 aerosol cans fit in the Spill Station TSSAC100, spread across two storage levels behind a single door. Powder-coated steel and a ventilated design keep the cans contained, and the cage measures 880mm (H) x 820mm (W), so check your floor space before ordering.
Does the aerosol storage cage need assembly?
Yes. The Spill Station cage is delivered flatpack and assembled on site, which keeps delivery simple for a unit measuring 880mm (H) x 820mm (W). Choose a well-ventilated position away from heat, direct sun and ignition sources before you build it, then load the two storage levels.
How big is the Spill Station aerosol storage cage?
The cage measures 880mm (H) x 820mm (W) and is built from powder-coated steel, with two storage levels behind one door. Because it ships flatpack, plan both the delivery access and the final standing position, and confirm the dimensions on the Done Right Safety product page before ordering.
Where should you site an aerosol storage cage?
Locate the cage in a well-ventilated area away from heat, direct sun and ignition sources, keep it secured, and keep the contents within the manufacturer's capacity. Segregate aerosols from incompatible goods, and check the dangerous-goods obligations that apply to your Australian workplace along with the Safety Data Sheets for what you store.
Done Right Safety Team
Safety, PPE & Workwear Specialists
Written from the product real specifications, its listed AS/NZS ratings and manufacturer supplied detail. Where a listing does not state a rating, the guide says so. Read the editorial standards.
Sources
- Spill Station product listing on donerightsafety.com.au